Monday, September 14, 2015

Netgear D7000-100UKS Nighthawk AC1900 D7000 router and DSLStats


Just in case it helps anyone out there, I struggled to set up DSL Stats with this router.

I ended up using the netgear debug url to enable telnet (http://192.168.0.1/setup.cgi?todo=debug), which left me with a prompt for a username which I had to enter 'root' (without quotes).

To set up DSL Stats, I used these settings:
Modem/Router model  -  
IP Address: - set to the IP of your router
Telnet login name: - leave blank
Telnet password - leave blank
Telnet port - 23
tick the box  " Requires command to enter shell"
Shell command - root
CLI command prefix - xdslctl

with these settings it began collecting data for me. HTH and HAND :)



NETGEAR D7000-100UKS Nighthawk AC1900 Dual Band 600+1300 Mbps Wireless (Wi-Fi) VDSL/ADSL Modem Router for Phone Line Connections

4 comments:

Bat 'n' Ball said...

Great guide - thank you :)

Paul.

elemental.tm said...

Thanks for the headsup Simon. Information in general seems a bit thin on the ground for the Netgear D7000 still.
Have you any update or tweaks to these settings since you originally posted them?

Cheers, j.

Shreyansh Jain said...

Thanks For Sharing this information
netgear router tech support number

elemental.tm said...

FYI: Another option if your in the UK is to get a White box from Samknows - https://www.samknows.com